24h hot line +86 13058073558 Service & Support Join us Contact Us
ZLRK, welcome!

Products

Products

> Products > Heat pump dryer

Closed-loop desiccant heat pump dryer

Product description

Heat pump device consists of compressor, electronic expansion valve, dry filter, four-way valve, evaporator, casing condenser, fan and other major components, it adopts inverse Carnot principle, the compressor from the evaporator inhalation of low temperature and low pressure air Refrigerant, through the work of the refrigerant compressed into high temperature and high pressure air, high temperature and high pressure air into the condenser and air exchange heat, condensed into a cryogenic liquid in the condenser and release a lot of heat, the material absorbs its release of energy through the hot air circulation strong row of its moisture to achieve the purpose of drying materials. The condensed high temperature and low pressure liquid is throttled and reduced by the expansion valve, and the heat of the surrounding air is absorbed by the action of the fan in the evaporator to volatilize into the low pressure air and is compressed into the compressor, so that it is circulated continuously and dry materials continuously.

1.This product is mainly applicable to the drying of agricultural by-products with large moisture, long drying cycle and special dehumidification requirements.

2.Human-machine interface operation, PLC control, temperature and humidity control, intelligent dehumidification, running state display, fault detection, etc,.

3.Adopts independent research and development of multiple dehumidification heat recovery technology, heating speedy, dehumidification efficiency, heat recovery, energy saving effect is remarkable;

4.Whole machine with closed loop circulation, can not be influenced by the open air temperature, heat loss is very small, not only energy saving, but also used widely.

5.Hot air circulation adopts our patented technology, two-ways circulation, heat  multi-times reuse, drying efficiency is high, uniformity is good.

6.Equipment selection industry is optimal, running stable, long service life.

7.Layout according to the workshop situation, beautiful, generous, easy to clean.

Applicable materials

Potato, sweet potato, yam, honeysuckle, day lily, rose bud, rose flower, chrysanthemum, okra, hibiscus, plum blossom, jasmine, pepper, medlar, prawns, squid, sea cucumber, shrimp meat paste, fish balls, tofu material, tuna, catfish, abalone, beef jerky, chicken jerky, pet food, sausage, bacon, cordyceps sinensis, maca, ginseng, astragalus, angelica, dendrobe, rehmannia, bird's Nest, licorice, hawthorn slices, candy, fruit pulp, fruit paste products which require low temperature drying materials.


Consultation Get quotes

24h hot line: +86 13058073558

Description

Heat pump device consists of compressor, electronic expansion valve, dry filter, four-way valve, evaporator, casing condenser, fan and other major components, it adopts inverse Carnot principle, the compressor from the evaporator inhalation of low temperature and low pressure air Refrigerant, through the work of the refrigerant compressed into high temperature and high pressure air, high temperature and high pressure air into the condenser and air exchange heat...

Features

image.png

Equipment structure

Device parameters

Model

ZL-KNC-12P-12A

ZL-KNC-18P-12A

ZL-KNC-18P-15A

ZL-KNC-24P-15A

Voltage/frequency

380V/50Hz

380V/50Hz

380V/50Hz

380V/50Hz

 Rated power of heat pump(Kw)

11

16.5

16.5

22

Rated current(A)

22

33

33

44

Heating capacity(Kw)

38.5

57

57

77

Rated power of deputy heater(Kw)

30

30

30

40

Rated current of deputy heater(A)

60

60

60

80

heating capacity(Kw)

30

30

30

40

Dehumidification capacity(L/H)

30

45

45

60

Max. temperature of drying room(℃)

75

75

75

75

Ambient temperature range(℃)

0~43

0~43

0~43

0~43

Electric shock Rating (class)

1

1

1

1

Max.pressure at expulsion(MPa)

≤2.8

≤2.8

≤2.8

≤2.8

Noise[dB(A)]

≤75

≤75

≤75

≤75

Air volume of fan (m3/h)

36000 in drying room

36000 in drying room

72000 in drying room

72000 in drying room

Weight(kg)

1000

1400

1400

1800

Drying chamber material

75 mm thickness high density PU insulation material, both sides are 1.2 mm thickness mild steel plate with painting

75 mm thickness high density PU insulation material, both sides are 1.2 mm thickness mild steel plate with painting

75 mm thickness high density PU insulation material, both sides are 1.2 mm thickness mild steel plate with painting

75 mm thickness high density PU insulation material, both sides are 1.2 mm thickness mild steel plate with painting

Overall dimension(mm)

7000×2830×2795/4295

7000×2830×2795/4295

9000×2830×2795/4295

9000×2830×2795/4295

Air direction model

One direction, horizontal air flow

One direction, horizontal air flow

two direction  alternate, horizontal air flow

two direction  alternate, horizontal air flow

Trolley number

12 trolley

12 trolley

15 trolley

15 trolley

(The above parameters are based on the ambient dry ball temperature 25 ℃, wet ball temperature 20 ℃, dehumidification amount based on the relative humidity 60%, due to different material structure caused drying time changes, the company has the right to update the parameters separately)

Submit requests online:

You can fill in the form below to submit your personal / business needs and we will contact you within 24 hours to resolve your problem! Your information will be kept strictly confidential.

  • Clear

版权所有:©河南中联热科工业节能有限公司 备案号:豫ICP备19033337号 豫公网安备 41018202000355号

网站地图

24hour hotline

+86 13058073558

Inquire Now